You may also like
FAQs
All orders placed on bmsup.com are processed within 2 business days. Delivery times within 1 – 5 business days.
It’s not difficult at all. Our iSUP pump is a double-acting pump that allows you to “switch gears” as pumping becomes more and more difficult. Although pumping up your board will give you some exercise, you can accomplish in about 10 minutes.
HB currently supports delivery countries: the United States, Canada, Germany, the United Kingdom, and Japan. We are also working hard to provide delivery services to customers in other countries.
Here are several maintenance tips:
Clean the circuit board with fresh water and mild soap after use;
If the circuit board is inflated under direct sunlight, deflate it to at least 10 PSI;
Sharp debris can pierce your circuit board, so don’t drag it;
Avoid long-term storage, because the adhesive to decompose;
Keep the circuit board away from high temperature and humidity;
Wipe the board dry after use and before storage to avoid mold damage;
Be sure to read the instructions that came with your board. Connect the air hose to the “outer” side of the pump. Locate the air valve at the back of the board and make sure that the air valve needle is in the up position before inflating. Insert the other end of the hose into the high-pressure air valve and screw it clockwise into the high-pressure air valve. Inflate the circuit board to 12-15 PSI. The barometer will not register until you reach 7-8 PSI. After fully inflating, carefully twist the pump hose counterclockwise. Replace the bonnet on the air valve.